Siser HOLOGRAPHIC Heat Transfer Vinyl Sheet

$3.99
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

Sheet Size: 12"x20"

Holographic contains color changing chips that create the effect of depth and dimension. Available in many special effect colors and finishes, Holographic will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with applying rhinestone designs. The Holographic line also features our Pearl material. Pearl is unlike any other material, giving your designs an opalescent finish.

Holographic is CPSIA Certified, so it’s perfect for decorating items intended for children.

| APPLIES TO |

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather

| SPECIFICATIONS |

 Polyester Composition • Pressure sensitive backing • Gloss finish • 110 Microns/4.3 Mils • 45°/60° blade • Layering not recommended

| APPLICATION |

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold


| LAUNDERING |

Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean

| CUTTER SETTINGS |

Cricut:

 

Blade: Standard
Setting: Light Cardstock

Silhouette Cameo:

 

Blade: Standard, 3
Setting: Heat Transfer
Material: Smooth
Speed: 8
Thickness: 14

Scan N Cut:

 

Blade: 2
Cut Speed: 1
Cut Pressure: 3

Roland GS/GX-24:

 

Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s

Graphtec:

 

Blade: 45°
Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s

 

[sheets sizes may vary from + or - half of an inch]